Home > BRAKES > BRAKE ACCESSORIES > BREMBO CALIPER XA5C201/02
Sort By:
Page of 1
WS-7 BREMBO 7/16 WASHER 05385110 BREMBO RUBBER PLUG MS-7 BREMBO 7/16 NUT
WS-7 BREMBO 7/16 WASHER
MSRP $0.35
Sale Price: $0.34
Savings: $0.01
05385110 BREMBO RUBBER PLUG
MSRP $1.00
Sale Price: $0.95
Savings: $0.05
MS-7 BREMBO 7/16 NUT
MSRP $5.08
Sale Price: $4.83
Savings: $0.25
WS-7, BREMBO 7/16 WASHER, COUNTERSUNK ONE SIDE
BREMBO RUBBER PLUG
MS-7, BREMBO 7/16 NUT
80080C BREMBO STUD, MOUNTING XA4F101, XA5C201 BREMBO CALIPER TEMPERATURE STICKERS 10 PACK BRE-10868726 BREMBO BRAKE FLUID RESERVOIR MOUNTING BOLT
80080C BREMBO STUD, MOUNTING XA4F101, XA5C201
MSRP $29.08
Sale Price: $27.63
Savings: $1.45
BREMBO CALIPER TEMPERATURE STICKERS 10 PACK
MSRP $33.27
Sale Price: $31.61
Savings: $1.66
BRE-10868726 BREMBO BRAKE FLUID RESERVOIR MOUNTING BOLT
MSRP $52.75
Sale Price: $50.12
Savings: $2.63
STUD, MOUNTING XA4F101, XA5C201, 12MM DIAMTER SHANK, 7/16-20, 7/16-20, 2.925" OAL
BY MONITORING BRAKE CALIPER TEMPERATURES, YOU CAN MAKE SURE THAT THE WORKING RANGE OF THE BRAKE FLUID HAS NOT BEEN EXCEEDED. IF THE TEMPERATURES EXCEED THE FLUID, FLUID VAPORIZATION CAN OCCUR CAUSING LOSS OF THE BRAKE PEDAL.
FOR THOSE RUNNING FIXED, MULTI-PISTON CALIPERS (BREMBO GT, FOR EXAMPLE), RECOMMENDED WORKING TEMPERATURE IS <200°C (392°F), WHEREAS THE MAXIMUM ACCEPTABLE WORKING TEMPERATURE IS 220°C (428°F); OVER 240°C (464°F), THE SEALS FITTED INTO THE CALIPERS CAN BE OVERHEATED AND THEY WILL NOT GUARANTEE THE RIGHT PERFORMANCE OF THE CALIPER (SEALING, ROLL BACK, FLUID ABSORPTION,...);
IF THE CALIPER TEMPERATURE GOES OVER 240°C (464°F), THE DUST SEALS AND PRESSURE SEALS SHOULD BE REFRESHED.
BREMBO BRAKE FLUID RESERVOIR MOUNTING BOLT
IDD 06-0002 BREMBO XA5C201/02 CALIPER DISASSEMBLY TOOL BREMBO HIGH TEMPERATURE PAINT
BREMBO HIGH TEMPERATURE PAINT
MSRP $160.00
Sale Price: $152.00
Savings: $8.00
XA5C201/02 CALIPER DISASSEMBLY TOOL

BRAKE DISC PAINT IS FOR PEOPLE WHO REGULARLY TRACK THEIR VEHICLES (TYPICAL TO RACING) OR HAVE VEHICLES THAT ARE HARD ON BRAKES IN WHICH CASE, IT IS A GOOD IDEA TO KEEP BRAKE DISC TEMPERATURES IN CHECK.
ASIDE FROM A PYROMETER, THERMOMETER, OR INFRARED SENSORS, BREMBO RACING ROTOR PAINTS ARE THE MOST COST-EFFECTIVE SOLUTION TO MANAGING BRAKE DISC TEMPERATURES; FOR OPTIMIZING BRAKE SETUP, COMPOUNDS.

  • GREEN: 430°C/806°F
  • ORANGE: 560°C/1040°F
  • RED: 610°C/1130°F

ONCE THEY REACH THE SPECIFIED TEMP RANGE, THEY OXIDIZE, WHICH TURNS THEM GREEN/RED; WHITE OR AN ORANGE/OFF-WHITE (YELLOWISH TINT) IF THEY REACH THE PEAK TEMPERATURE

TECH TIP: DISC PAINT SHOULD BE PAINTED LIBERALLY ONTO THE ENTIRE WIDTH OF THE DISC, INCLUDING VANE AND ROTOR CHEEKS.