TSCO TROPHY TRUCK/6100

Home > SUSPENSION > UPRIGHTS > TSCO TROPHY TRUCK/6100

FOR UPRIGHT PARTS LIST CLICK HERE
THE CALIPER MOUNTING STUD AND CALIPER ADAPTER ARE DEPENDENT ON THE CALIPER BEING USED
IF USING A 4 PISTON BREMBO CALIPER (XA5T003/4) USE THE FOLLOWING COMPONENTS:
BREMBO MOUNTING STUD - 80080B
ID CALIPER ADAPTER - IDD 06-2001

Sort By:

Page of 1


80080B BREMBO STUD, MOUNTING, XA5T003/04 MSRP $25.00 Sale Price: $23.75 Savings: $1.25	SPINDLE NUT LOCK WASHER N10 Our Price: $26.11	80080C BREMBO STUD, MOUNTING XA4F101, XA5C201 MSRP $29.08 Sale Price: $27.63 Savings: $1.45

STUD, MOUNTING, XA5T003/04,12MM SHANK, 7/16-20, 7/16-20, 2.620" OAL QUANTITY 1	4130 SPINDLE LOCK NUT WASHER N10	STUD, MOUNTING XA4F101, XA5C201, 12MM DIAMTER SHANK, 7/16-20, 7/16-20, 2.925" OAL QUANTITY 1


SPINDLE NUT N10 Our Price: $35.00	SPINDLE NUT NL10 Our Price: $35.00	IDD-14-1610-2.75 SPACER Our Price: $36.11

N10 LOCKING HUB NUT THREAD MAJOR DIAMETER 1.967in 18 THREADS PER INCH	NL10 LOCKING HUB NUT THREAD MAJOR DIAMETER 1.967in 18 THREADS PER INCH LEFT HAND THREAD	HIGH MISALIGNMENT SPACER FOR 1.00 BEARING W/ 5/8 BOLT AND 2.75 POCKET WIDTH POCKET WIDTH IS BASED ON 1.375 WIDE BALL SPACER IS OVERSIZED FOR POCKET AND SHOULD BE TURNED DOWN TO FIT


IDD-14-2414-4.00 SPACER Our Price: $45.58	IDD-14-2408 CAP-A UPRIGHT PIN CAP ASSEMBLY Our Price: $45.58	IDD 06-2001 BREMBO CALIPER ADAPTER 180mm RADIAL TO 6" AXIAL MOUNT Our Price: $189.43

HIGH MISALIGNMENT SPACER FOR 1.50 BEARING W/ 7/8 BOLT AND 4.00 SPACER POCKET WIDTH IS BASED ON 1.375 WIDE BALL SPACER IS OVERSIZED FOR POCKET AND SHOULD BE TURNED DOWN TO FIT	UPRIGHT PIN CAP ASSEMBLY	CALIPER ADAPTER 180mm RADIAL TO 6" AXIAL MOUNT. FITS XA5T003/4 CALIPERS


IDD 06-2002 BREMBO CALIPER ADAPTER 210mm RADIAL TO 6" AXIAL MOUNT Our Price: $197.67	IDD 01-4000 ID DESIGNS GEN 1 FRONT HUB PACKAGE Our Price: $1,745.17

CALIPER ADAPTER 210mm RADIAL TO 6" AXIAL MOUNT. FITS XA5C201/2, XA4F101/2, ALCON 210MM CALIPERS	ID DESIGNS GEN 1 FRONT HUB PACKAGE