Home > BRAKES > BRAKE ACCESSORIES > BREMBO CALIPER XA9K601/02
Sort By:
Page of 1
WS-3 BREMBO 3/8 WASHER 05385110 BREMBO RUBBER PLUG MS-3 BREMBO 3/8 NUT
WS-3 BREMBO 3/8 WASHER
MSRP $0.35
Sale Price: $0.34
Savings: $0.01
05385110 BREMBO RUBBER PLUG
MSRP $1.00
Sale Price: $0.95
Savings: $0.05
MS-3 BREMBO 3/8 NUT
MSRP $5.08
Sale Price: $4.83
Savings: $0.25
WS-3, BREMBO 3/8 WASHER, COUNTERSUNK ONE SIDE
BREMBO RUBBER PLUG
MS-3, BREMBO 3/8 NUT
80087 BREMBO STUD, MOUNTING, XA9K601/02 BREMBO CALIPER TEMPERATURE STICKERS 10 PACK BRE-10868726 BREMBO BRAKE FLUID RESERVOIR MOUNTING BOLT
80087 BREMBO STUD, MOUNTING, XA9K601/02
MSRP $29.08
Sale Price: $27.63
Savings: $1.45
BREMBO CALIPER TEMPERATURE STICKERS 10 PACK
MSRP $33.27
Sale Price: $31.61
Savings: $1.66
BRE-10868726 BREMBO BRAKE FLUID RESERVOIR MOUNTING BOLT
MSRP $52.75
Sale Price: $50.12
Savings: $2.63
STUD, MOUNTING, XA9K601/02, 10MM DIAMETER SHANK, 3/8-24, 3/8-16, 2.570" OAL
BY MONITORING BRAKE CALIPER TEMPERATURES, YOU CAN MAKE SURE THAT THE WORKING RANGE OF THE BRAKE FLUID HAS NOT BEEN EXCEEDED. IF THE TEMPERATURES EXCEED THE FLUID, FLUID VAPORIZATION CAN OCCUR CAUSING LOSS OF THE BRAKE PEDAL.
FOR THOSE RUNNING FIXED, MULTI-PISTON CALIPERS (BREMBO GT, FOR EXAMPLE), RECOMMENDED WORKING TEMPERATURE IS <200°C (392°F), WHEREAS THE MAXIMUM ACCEPTABLE WORKING TEMPERATURE IS 220°C (428°F); OVER 240°C (464°F), THE SEALS FITTED INTO THE CALIPERS CAN BE OVERHEATED AND THEY WILL NOT GUARANTEE THE RIGHT PERFORMANCE OF THE CALIPER (SEALING, ROLL BACK, FLUID ABSORPTION,...);
IF THE CALIPER TEMPERATURE GOES OVER 240°C (464°F), THE DUST SEALS AND PRESSURE SEALS SHOULD BE REFRESHED.
BREMBO BRAKE FLUID RESERVOIR MOUNTING BOLT
20B71603 BREMBO CALIPER ADAPTER XA9K601/02 BREMBO HIGH TEMPERATURE PAINT
20B71603 BREMBO CALIPER ADAPTER XA9K601/02
MSRP $115.00
Sale Price: $109.25
Savings: $5.75
BREMBO HIGH TEMPERATURE PAINT
MSRP $160.00
Sale Price: $152.00
Savings: $8.00
BREMBO CALIPER ADAPTER FITS XA9K601/02

BRAKE DISC PAINT IS FOR PEOPLE WHO REGULARLY TRACK THEIR VEHICLES (TYPICAL TO RACING) OR HAVE VEHICLES THAT ARE HARD ON BRAKES IN WHICH CASE, IT IS A GOOD IDEA TO KEEP BRAKE DISC TEMPERATURES IN CHECK.
ASIDE FROM A PYROMETER, THERMOMETER, OR INFRARED SENSORS, BREMBO RACING ROTOR PAINTS ARE THE MOST COST-EFFECTIVE SOLUTION TO MANAGING BRAKE DISC TEMPERATURES; FOR OPTIMIZING BRAKE SETUP, COMPOUNDS.

  • GREEN: 430°C/806°F
  • ORANGE: 560°C/1040°F
  • RED: 610°C/1130°F

ONCE THEY REACH THE SPECIFIED TEMP RANGE, THEY OXIDIZE, WHICH TURNS THEM GREEN/RED; WHITE OR AN ORANGE/OFF-WHITE (YELLOWISH TINT) IF THEY REACH THE PEAK TEMPERATURE

TECH TIP: DISC PAINT SHOULD BE PAINTED LIBERALLY ONTO THE ENTIRE WIDTH OF THE DISC, INCLUDING VANE AND ROTOR CHEEKS.